Tall Clock Fast Finish

IMG_1874If you’ve followed this blog for anytime at all, you know I’ve been working on two tall case clocks. I’m happy to say that one of the clocks is done. Mine! Why is the clock I built for me complete and the other for a customer not yet finished? The answer is two-fold.

If you watched any of the episodes of the New Yankee Workshop, Norm always built a prototype. Even though I was building two clock simultaneously, I worked out the details onΒ  the clock I was building for myself before moving to the customer’s clock. (Believe me, there were quite a few adjustments along the way.) As a result, their clock is much better. I experimented on inlay, door design and most recently on how to best position the hood door; it took two attempts to get the location right.

The second reason my clock is complete while the customers languishes on is due to the clock dial pan. Many of these antique clocks had hand-painted dials. We’d talked about the dial many times, but it wasn’t until recently that final decisions were made as to what would be painted. With a decision made and the painter contacted, the customer’s dial should be completed in November. Step_1I, on the other hand, have not yet determined what I’d like to have painted on my dial. So how did I get my clock finished? I cheated.

I visited an antique clock dealer’s web site, selected a clock that I liked, checked that the dealer had shown a front-on view of the painted dial (where the red arrow points), then copied the dial into my computer. You can see the page at the right. (If you click on any of the photos, they will enlarge for a better view.)

Step_2Once the dial was loaded, I went in and stripped the interior of the image out using PhotoShop – I’m not overly experienced with this program, but I squeeze by. I pulled the interior out because I have a movement complete with hands that I want to use, so there was no need for the hands. Also, don’t have a sweep second hand (the miniature dial just below the XII) although those are very cool in antique clocks. Lastly, I didn’t want my clock signed by Aaron Willard from Boston (not that I wouldn’t be thrilled to own such a clock). With those steps complete, I manipulated the image to match the dial pan size and hit the print button.

And in case you think I’m pulling one over on you, below is a photo of my clock with the hood off. When I figure out the painting for the dial, I’ll make the change. But until then my paper cheat is going to work fine.

Build Something Great!

Glen

IMG_1875

Posted on

4 thoughts on “Tall Clock Fast Finish

  1. Very GOOD, Glen!

    Incidentally, I was surprised to see that The American Woodworker had been apparently merged with (Bought out by Popular Woodworking)… etc.

    I was happy to see that YOU were STILL the Editor to survive the transaction! Good for you! They did something right! πŸ™‚

    It looks like the rest of my Amer. Woodworker mags. will be finished out with Popular Woodworking. Will this be in printed form as well as Digital form?

    I’m now a subscriber of Popular Woodworking again, after I got pissed off with them, way back when… That’s good! I like the Staff better NOW! πŸ™‚

    Was it ever mentioned here, & I just missed it, or was it purposely kept quiet?

    Thank you for being there!
    Your friend,
    Joe Lyddon

    1. Hey Joe,
      I was made editor of AW and had the opportunity to publish a single issue before the company decided to merge the magazine into PWM. With the merge, I returned to PWM as managing editor. I never mentioned this on my blog because it’s business related. BTW – welcome back to PWM. I hope you better enjoy the ride this time.

      1. It’s good to see You as the Managing Editor… much better than other choices. I feel GOOD about the merger & being a New subscriber to PWM again!

        Yeah… I got One issue of AMWW with you as the Editor… I noticed that they (seems like all magazines) are getting slimmer… Cutting costs as well as quality…

        Thank you for being there,
        Joe

  2. Glen, excellent job with the clock. It looks great.
    And a nice tribute to the “Jersey Boy,” Mr. Egerton.

Leave a Reply

Your email address will not be published. Required fields are marked *